|
| Author |
Message |
SHTRX3
|
Post subject: 4 barrel 1/4 mile times?? Posted: Sun Dec 04, 2005 8:19 pm |
|
 |
| 12a pp |
Joined: Thu Dec 02, 2004 6:38 pm Posts: 535
|
|
|
|
just wondering what times people have pulled using 4 barrel and sideports?? what porting and who built the engine ??
don't be shy
|
|
| Top |
|
 |
moogoose
|
Post subject: Posted: Sun Dec 04, 2005 8:33 pm |
|
 |
| 20b |
Joined: Sat Feb 21, 2004 3:39 pm Posts: 2205 Location: North Shore
|
|
|
yeh anyone out there with a 2dr 323 wagon running a rx3 diff, s3 box and a 12a stage II with a 4 barrel? wanting to know what times i can expect 
-----------> 2 door wagon in the build!
|
|
| Top |
|
 |
moogoose
|
Post subject: Posted: Sun Dec 04, 2005 8:36 pm |
|
 |
| 20b |
Joined: Sat Feb 21, 2004 3:39 pm Posts: 2205 Location: North Shore
|
|
|
quote from another thread:
Dejavodo wrote: 323 wagon 12a brigde 4 barrell facet 14.7 on some usa 800s mean i was impressed.
if i can pull a 14 with my 1st rotor setup, il be 
-----------> 2 door wagon in the build!
|
|
| Top |
|
 |
mattmarrx3
|
Post subject: Posted: Mon Dec 05, 2005 7:47 am |
|
 |
| 13b j on Nos |
Joined: Sun Sep 28, 2003 8:01 pm Posts: 998
|
|
|
|
14.5 something 12a bp and a side draught lightend flywheel in the 3 on bf goodrichs
|
|
| Top |
|
 |
Dejavodo
|
Post subject: Posted: Fri Dec 09, 2005 4:39 pm |
|
 |
| 12a PP on Nos |
Joined: Mon Oct 13, 2003 4:58 pm Posts: 589 Location: Sth Auck
|
|
|
moogoose wrote: quote from another thread: Dejavodo wrote: 323 wagon 12a brigde 4 barrell facet 14.7 on some usa 800s mean i was impressed. if i can pull a 14 with my 1st rotor setup, il be 
that time was in a 2 door 323 wagon with a locked 323 diff!
Nothing.
|
|
| Top |
|
 |
UZN GAS
|
Post subject: Posted: Fri Dec 09, 2005 5:27 pm |
|
 |
| 26 b |
Joined: Wed Oct 01, 2003 9:00 pm Posts: 4921 Location: pPg or Beating panels
|
|
|
|
| Top |
|
 |
Rotatin
|
Post subject: Posted: Sun Dec 11, 2005 8:42 pm |
|
 |
| 12a bridge with a IDA |
Joined: Mon Dec 15, 2003 5:59 pm Posts: 436 Location: Chch
|
|
|
|
Has anyone made it into the 13s with a nikki? Might make i my mission haha ill see how the nikki powered bridge with supra box and 5:1 b1600 diff will go
|
|
| Top |
|
 |
ROTA NUT 13B
|
Post subject: Posted: Sun Dec 11, 2005 8:53 pm |
|
| 12a PP turbs |
Joined: Mon Dec 08, 2003 9:20 pm Posts: 627 Location: Waiuku
|
|
|
|
i'm sure that 323 wagon [PRPLHZ] was pullin good times at the last summer drags, think it had a motor from the green brothers in it.
|
|
| Top |
|
 |
Wagnstylz
|
Post subject: Posted: Sun Dec 11, 2005 10:24 pm |
|
| 12a pp |
Joined: Mon Dec 15, 2003 4:28 pm Posts: 520 Location: Mt Maunganui
|
|
|
|
yea andres wagon, think it ran a 13.8 12bp with 4bbl, not sure what diff/box set up though, and yea set up by the greens by memory!
hes running a 13bt set up ive been told
DWNUGO
|
|
| Top |
|
 |
edhunter
|
Post subject: Posted: Sun Dec 11, 2005 11:12 pm |
|
| 20b PP turbz |
Joined: Thu Apr 22, 2004 10:49 pm Posts: 4349 Location: tauranga
|
|
|
he runnin ida now, last time i talked to him thats wot he was tellin me less my memory escapes me 
s3 rx7 [DSORDR]
|
|
| Top |
|
 |
xsrevs
|
Post subject: Posted: Mon Dec 12, 2005 12:19 pm |
|
| 10a Bridgy |
Joined: Sat Jan 22, 2005 11:34 am Posts: 142 Location: mount
|
|
|
|
He got two 13.9s at summerdrags.
B1600 diff,not sure bout gearbox but it is a well set up car.
Is running ida now so he should do better next year.
|
|
| Top |
|
 |
UZN GAS
|
Post subject: Posted: Mon Dec 12, 2005 12:38 pm |
|
 |
| 26 b |
Joined: Wed Oct 01, 2003 9:00 pm Posts: 4921 Location: pPg or Beating panels
|
|
|
Rotatin wrote: Has anyone made it into the 13s with a nikki? Might make i my mission haha ill see how the nikki powered bridge with supra box and 5:1 b1600 diff will go
Should be able to get 12s with a 4barrel with the right set up, v8s use them and go hard
 
"YOU'LL HEAR IT BEFORE YOU SEE IT"
www.jascoautomotive.com
|
|
| Top |
|
 |
SKTCHY
|
Post subject: Posted: Sat Dec 17, 2005 10:09 am |
|
 |
| RotahaviK |
Joined: Wed Oct 01, 2003 3:31 pm Posts: 1779 Location: Queenstown NZ
|
|
|
16.9 with a stock standard 12A engine, emission gears and all! in a series 1.
hopefully with my new engine in, and all tuned up and running mint i'll be able to get into low 14's, maybe even 13's
have to see come summerdragz time 
|
|
| Top |
|
 |
moogoose
|
Post subject: Posted: Sat Dec 17, 2005 2:03 pm |
|
 |
| 20b |
Joined: Sat Feb 21, 2004 3:39 pm Posts: 2205 Location: North Shore
|
|
|
SKTCHY wrote: 16.9 with a stock standard 12A engine, emission gears and all! in a series 1. hopefully with my new engine in, and all tuned up and running mint i'll be able to get into low 14's, maybe even 13's have to see come summerdragz time 
not bad for a standy  sounds all good, whats the plans for the new setup??
-----------> 2 door wagon in the build!
|
|
| Top |
|
 |
SKTCHY
|
Post subject: Posted: Sat Dec 17, 2005 2:57 pm |
|
 |
| RotahaviK |
Joined: Wed Oct 01, 2003 3:31 pm Posts: 1779 Location: Queenstown NZ
|
|
|
moogoose wrote: SKTCHY wrote: 16.9 with a stock standard 12A engine, emission gears and all! in a series 1. hopefully with my new engine in, and all tuned up and running mint i'll be able to get into low 14's, maybe even 13's have to see come summerdragz time  not bad for a standy  sounds all good, whats the plans for the new setup??
yeh i was surprised,
just running a 13B bridgeport now, still need to do a bit to it, carb sorted, fuel lines etc, so will just leave the 4barrel on and see what i can do with that untill it reaches its limit, then maybe an IDA
|
|
| Top |
|
 |
rx323van
|
Post subject: Posted: Wed Feb 15, 2006 2:49 pm |
|
| 10a PP |
Joined: Mon Jan 16, 2006 11:55 am Posts: 183 Location: auckland
|
|
|
|
14.9 in my 2 dr wagon 13b bridge rx5 gear box.single spinner rx7 diff
|
|
| Top |
|
 |
rotaheadalex
|
Post subject: Posted: Mon Sep 11, 2006 11:18 pm |
|
| 10a |
Joined: Thu Feb 16, 2006 5:24 pm Posts: 88 Location: Sydney, Australia
|
|
|
|
i think you guys need to learn how to drive
i pulled a 13.1 with my series 5 13bt running a stock nikki carb with no seccondarys (engine was stock as a rock) i had brnd new street tyres and stock gearbox and diff in a series 2 rx7
|
|
| Top |
|
 |
S0LJAH
|
Post subject: Posted: Thu Nov 16, 2006 2:40 pm |
|
| 13b PP injected IDA on nos |
Joined: Fri Oct 03, 2003 8:08 pm Posts: 1656 Location: CHCH
|
|
|
rotaheadalex wrote: i think you guys need to learn how to drive
i pulled a 13.1 with my series 5 13bt running a stock nikki carb with no seccondarys (engine was stock as a rock) i had brnd new street tyres and stock gearbox and diff in a series 2 rx7
i find that hard to believe mate
thats over a second faster than a what they say a standard s5 turbo time is or a batty
and youve got no turbo 
|
|
| Top |
|
 |
ono13b
|
Post subject: Posted: Thu Nov 16, 2006 4:04 pm |
|
 |
| 12a pp |
Joined: Thu Nov 11, 2004 11:31 am Posts: 513 Location: The North Shore massive
|
|
|
rotaheadalex wrote: i think you guys need to learn how to drive
i pulled a 13.1 with my series 5 13bt running a stock nikki carb with no seccondarys (engine was stock as a rock) i had brnd new street tyres and stock gearbox and diff in a series 2 rx7
with no secondarys? or no mechancial secondary's cause there is quite a bit of differents!
any ways like soljah put it i find that hard to beleive some how!
|
|
| Top |
|
 |
pop_uz
|
Post subject: Posted: Fri Nov 24, 2006 7:11 pm |
|
 |
| 10a PP |
Joined: Wed May 18, 2005 9:42 pm Posts: 189
|
|
|
rotaheadalex wrote: i think you guys need to learn how to drive
i pulled a 13.1 with my series 5 13bt running a stock nikki carb with no seccondarys (engine was stock as a rock) i had brnd new street tyres and stock gearbox and diff in a series 2 rx7
Hes from Aussie so that explains this blatant bullshit. No way you could run that with the set up your talking. 
|
|
| Top |
|
 |
NVD323
|
Post subject: Posted: Mon Mar 12, 2007 10:00 am |
|
 |
| 10a PP |
Joined: Thu Dec 09, 2004 6:43 pm Posts: 195 Location: Whakatane
|
|
|
rotaheadalex wrote: i think you guys need to learn how to drive
i pulled a 13.1 with my series 5 13bt running a stock nikki carb with no seccondarys (engine was stock as a rock) i had brnd new street tyres and stock gearbox and diff in a series 2 rx7
 nahh somehow i dont think so thats almost a 12. Fuck only if ya ported it and hook the seccondarys up u would have done 10s cuz 
|
|
| Top |
|
 |
SIKSEV
|
Post subject: Posted: Wed Mar 14, 2007 3:26 pm |
|
 |
| 13b PP injected IDA on nos |
Joined: Wed Oct 01, 2003 7:17 pm Posts: 1595 Location: Whakatane
|
|
|
|
yea man. im only expecting to run in the 13's some where in my S4. no way you could run 13.1 with no turbo and a 4 barrel.
Wanted = white FC3 bonnet scoop. you can unbolt them and mine broke as its only fibreglass
|
|
| Top |
|
 |
13b 929
|
Post subject: Posted: Wed Mar 14, 2007 4:32 pm |
|
 |
| 10a PP |
Joined: Mon Feb 19, 2007 10:10 am Posts: 156
|
|
|
haha rotaheadalex talks shit 
a bullet has no eyes and
a trigger has no heart
|
|
| Top |
|
 |
OLDSKOOLRX2
|
Post subject: Posted: Thu Mar 15, 2007 11:23 pm |
|
| 12a Bridge turbs |
Joined: Wed Dec 22, 2004 10:06 pm Posts: 483 Location: wellytown, gold coast/brisbane
|
|
|
rotaheadalex wrote: i think you guys need to learn how to drive
i pulled a 13.1 with my series 5 13bt running a stock nikki carb with no seccondarys (engine was stock as a rock) i had brnd new street tyres and stock gearbox and diff in a series 2 rx7
must have downn hill strips overthere or summink  no wonder they are quicker than us
After a 2nd MARKIV Mesa boogie head to complete a rack PM me if you have one for sully
|
|
| Top |
|
 |
madaz62
|
Post subject: Posted: Wed Mar 21, 2007 7:22 pm |
|
 |
| 13bPP with IDA |
Joined: Thu Oct 23, 2003 8:20 pm Posts: 1165 Location: south auckz
|
|
|
|
15.9 was best at summerdrags i think... 13b small bridge in 626
|
|
| Top |
|
 |
xsrevs
|
Post subject: Posted: Mon Mar 26, 2007 1:20 pm |
|
| 10a Bridgy |
Joined: Sat Jan 22, 2005 11:34 am Posts: 142 Location: mount
|
|
|
|
15.9 13b stage in a van with 13 inch b.f.g's
|
|
| Top |
|
 |
|
|